pi33 pinout?

Topics that concern all LCD-PI shields. New drivers and images for Raspberry Pi will be released through this forum.

pi33 pinout?

Postby mikewax » Fri Jun 13, 2014 7:05 am

is there a pinout available of the pi33? or at least a list of which pins on the header are not used by it?

thanx, mike
mikewax
 
Posts: 11
Joined: Fri Jun 13, 2014 3:24 am

Re: pi33 pinout?

Postby strancara » Fri Jun 13, 2014 8:04 am

LCD-PI33 uses the following pins from the GPIO connector:
Code: Select all
Pin   Purpose
SCLK    LCD controller and touch screen controller
MOSI   LCD controller and touch screen controller
MISO   reading push buttons, touch screen controller
CE0   LCD controller, for reading push buttons
CE1   touch screen controller
GPIO17   touch screen controller (interrupt)
GPIO18   backlight control (optional)
+5V   backlight power (75 mA typ.)
+3.3V   logic power (20 mA typ.)
GND   common ground
strancara
Site Admin
 
Posts: 32
Joined: Fri Mar 14, 2014 1:45 pm

Re: pi33 pinout?

Postby mikewax » Fri Jun 13, 2014 6:01 pm

thanx :-)
mikewax
 
Posts: 11
Joined: Fri Jun 13, 2014 3:24 am

Re: pi33 pinout?

Postby berbano » Tue Jul 22, 2014 8:12 pm

Hi, are they the same for PI32?. Thanks.
Berbano :)
berbano
 
Posts: 10
Joined: Mon May 05, 2014 1:49 pm


Return to LCD-PI Common Topics

Who is online

Users browsing this forum: No registered users and 5 guests

cron