Hi,
I need to use some GPIO from my raspberrypi but I don't find any documentation about the pins that LCD-PI32 don't use.
May you help me with that, please?.
Thanks
B.
Pin Purpose
SCLK LCD controller and touch screen controller
MOSI LCD controller and touch screen controller
MISO reading push buttons, touch screen controller
CE0 LCD controller, for reading push buttons
CE1 touch screen controller
GPIO17 touch screen controller (interrupt)
GPIO18 backlight control (optional)
+5V backlight power (90 mA typ.)
+3.3V logic power (20 mA typ.)
GND common ground
Return to LCD-PI Common Topics
Users browsing this forum: No registered users and 1 guest